7500 SERIES
Tow-Behind Stump Cutter/Grinder
The Carlton Model 7500 Stump Cutter is the tow behind machine by which all others are judged. The Carlton Model 7500 has a solid 30 year reputation of being the most productive tow behind grinder available. It is the choice of storm chasers and lot clearers nation wide.
Carlton Model 7500 utilizes a 74HP T4F four-cylinder turbo charged diesel engine.
Walk-Behind Stump Cutter/Grinder
74 HP Kohler T4F Turbo Charged Diesel, 74 HP Kubota T4F Turbo Charged Diesel
This model features a massive 31-inch cutter wheel which is 1 1/2-inches thick, holds 76 teeth and is Blanchard ground for smoothness. The cutter wheel combined with the turbo charged diesel power give J.P. Carlton Model 7500 unmatched performance. J.P. Carlton’s solid construction and use of the finest components give the 7500 unmatched quality.
Massive 31-inch Diameter by 1 1/2-inch cutter head makes cutting smooth and powerful.
Five Feet of Tongue Extension allows the 7500 to cut the largest stumps without repositioning.
Torsion Flex Suspension makes all J.P. Carlton tow-behind units ride smoothly.
SP5014 SERIES Specifications
| Engine option | 74 HP T4F 4 Cylinder Turbo Charged Diesel |
| Cutter depth below ground | 24″ |
| Cutter height above ground | 46″ |
| Cutter head swing | 92″ arc |
| Tongue cylinder | 60″ |
| Number of teeth on cutter wheel | 76 |
| Chip containment volume | 81 cu. Ft. |
| Cutter wheel diameter with teeth | 31″ |
| Cutter wheel thickness | 1 1/2 “ |
| Jack shaft bearings | 2 7/16 “ |
| Cutter wheel bearings | 2 7/16 “ |
| Fuel tank capacity | 40 gallons |
| Hydraulic tank capacity | 4 gallons |
| Tire size | 235/75-R16 |
| Machine width | 80″ |
| Total weight | 4400 lbs. |
| Paint | Dupont Imron with Epoxy primer |
Gallery
