SP5014 SERIES
Self-Propelled Stump Cutter/Grinder
The SP5014 series is a four-wheeled self-propelled unit designed to deliver maximum cutting power in hard to get to areas. A unique dual speed ground system allows the SP5014 to travel faster than any other stump cutter on the market today.
The unit also boasts a 1 1/4-inch thick, 21-inch diameter cutting wheel, letting you grind faster and smoother than ever before. The SP5014 Stump Cutter features heavy-duty construction (1,650 pounds), hydraulic steering and four-wheel stance. This combination offers unmatched stability and maneuverability.
Self-Propelled Stump Cutter/Grinder
27 HP Kohler Command, 35 HP Vanguard V-Twin, 37 HP Vanguard V-Twin EFI, 54 HP Kubota 4 Cylinder Gas
This compact machine has a width of 35 inches, allowing it to fit easily through standard backyard gates. The SP5014 incorporates many of the features found in larger J.P. Carlton models including a direct drive hydraulic pump, hardened bushings and shafts, counter balance valves on the lift, swing and hydraulic drive circuits.
The SP5014 series is available with a variety of engine options including: a 27-horsepower Kohler Engine and 35-horsepower Vanguard. With its wide range of features and dependable construction, the SP5014 is designed to maximize production and profits, while minimizing downtime.
Large Cutter Wheel, 21-inch diameter & 1 1/4-inch thick, provides maximum cutting power and flywheel momentum.
Feather Touch Hydraulic Controls make the SP5014 easy to operate and provide optimum user control.
Tapered Roller Bearings on jack shaft and cutter wheel provide long service life and reduced maintenance.
Proprietary Dual Motor Ground Drive eliminates troublesome chains, axles and axle bearings.
Optional Dual Wheels are quickly removed.
Available with 4 Wheel Drive – Allows the machine to traverse the nastiest of terrain.
Available with a Hydraulic Back Fill Blade – Helps with the clean up.
SP5014 SERIES Specifications
| Engine options |
35 HP Vanguard Big Block 993 CC |
| Cutter depth below ground | 14″ |
| Cutter height above ground | 34″ |
| Cutter head swing | 50″ |
| Tongue extension | 30″ |
| Cutter wheel thickness | 1 1/4″ |
| Number of teeth on cutter wheel | 36 Razor Teeth |
| Type of Cutter Teeth | Hard Micro Structure Carbide |
| Jack shaft bearings | 1 11/16″ |
| Cutter wheel bearings | 1 11/16″ |
| Chip containment volume | 16 cu. ft. |
| Fuel tank capacity | 10 gallons |
| Hydraulic tank capacity | 4 gallons |
| Ground Pressure | 8.6 PSI |
Gallery
