SP5014 TRX SERIES
Track-Mounted
The new SP5014TRX couples the industry’s best hydraulic controlled self-propelled grinder with the versatility of a rubber track undercarriage.
The SP5014TRX offers two engine options: 27 HP Kohler and 35 HP Vanguard. The SP5014TRX is also available with lever controls, wired remote control, or wireless remote control.
Track-Mounted
27 HP Kohler Command
35 HP Vanguard V-Twin
37 HP Vanguard V-Twin EFI
The SP5014TRX uses a rubber high track system that incorporates multiple idler rollers and spring tensioning to keep the track at optimal efficiency for running and tracking characteristics. This track system provides high floatation to minimize ground pressure and disturbance while providing a stable grinding platform and go anywhere traction.
Large Cutter Wheel, 21-inch diameter & 1 1/4-inch thick, provides maximum cutting power and flywheel momentum.
A Variety of Powerful Engines
Feather Touch Hydraulic Controls make the SP5014TRX easy to operate and provide optimum user control.
Tapered Roller Bearings on jack shaft and cutter wheel provide long service life and reduced maintenance.
Proprietary Rubber Track Undercarriage – provides positive climbing power over the roughest terrain.
Spring Tensioned Track – Keeps the tracks on the rollers and allows for easy adjustment.
High Track Sprocket – Keeps the track drive sprocket out of debris. Keeps more drive teeth engaged than competitors.
More Track Rollers than the competition – keeps the track in place across rough terrain.
SP5014 TRX SERIES Specifications
| General | |
| Weight | 2215 pounds |
| Length | 95 Inches |
| Height | 56 Inches |
| Width | 35 Inches – Narrow Stance 48 Inches – Wide Stance |
| Track Type | Rubber track |
| Track Foot Print | 7″ |
| Track Ground Pressure | 4 PSI |
| Track Length | 42″ |
| Controls | Side Mounted – Optional Remote |
| Brakes | Ground Speed Controlled by Hydraulics |
| Fenders | Bolt on 1/4 inch plate |
| Fuel Capacity | 10 Gallons |
| Battery | 650 Cold Cranking Amps |
| Curb Clearance | 13 Inches |
| Cutter Wheel Diameter | 21 Inches with Teeth |
| Cutter Wheel Thickness | 1 1/4 Inch – Blanchard Ground |
| Cutter Wheel RPM | 1350 Nominal |
| Engine | |
| Manufacturer | Vanguard Series 540000 V-Twin |
| Number of Cylinders | Two |
| Bore Type | Cast Iron Sleeve |
| Valves | Overhead |
| Bore | 3.4 Inches (85.5 mm) |
| Stroke | 3.4 Inches (85.5 mm) |
| Displacement | 60 Cubic Inches (993 cc) |
| Maximum RPM | 3600 |
| Horsepower | 35 |
| Peak Torque | 52 Ft* Lbs @ 2,400 RPM |
| Weight | 125 Lbs. (56.8 KG) |
| Oil Capacity w/Filter | 77.8 oz |
| Cooling Medium | Air |
| Air Cleaner | Dry Type Canister with Safety Element |
| Oil Filter | Spin On |
| Lubrication | Full Pressure w/Full Flow Filter |
| Electrical | 12 Volt |
| Hydraulic System | |
| Hyd Pump Displacement | .267 cu in (4.3 cc) |
| Hyd Pump Drive System | Direct Drive Coupling |
| Flow | 4.09 GPM |
| System Relief | 1850 PSI |
| Oil Tank Capacity | 4 Gallon |
| Oil Type | AW 32 |
| Valve | Series Type with Fine Metering |
| Check Valves | Cartridge Counterbalance Valves in Lift, Swing, and Drive Circuits |
| Hose | Steel Braided 16,000 PSI Burst – Exceeds SAE 100R2 |
| Oil Filter | 10 Micron Full Flow |
| Lift Cylinder | 3″ X 12″ with 1 3/8″ Rod and Replaceable End with Captured Pins |
| Drive System | |
| Engine Sheave | 6/3V4.75 |
| Jackshaft Sheave | 6/3V10.6 |
| Drive Belt | 3 Band 5V670 |
| Jackshaft Sprocket | 8M-40S-62 Gates PolyChain |
| Cutter Head Sprocket | 8M-40S-62 Gates PolyChain |
| Drive Belt | 8M-1200-62 Gates PolyChain |
| Jackshaft | 1 11/16 Inch |
| Cutter Head Shaft | 1 11/16 Inch |
| Engine Engagement | Sliding Engine Carriage |
| Belt and Chain Shields | Metal Bolt On |
| Bearings | |
| Jackshaft Bearings | 1 11/16 Inch Tapered Roller Bearings |
| Cutter Head Bearings | 1 11/16 Inch Tapered Roller Bearings |
| Swing Bearings | Adjustable Tapered Roller Bearings |
| Frame | |
| Tongue | 3″ X 3″ X 3/8″ wall Mechanical Tubing |
| Boom | 4 1/2″ X 4 1/2″ X 1/4″ wall Mechanical Tubing |
| Boom Box | 1/4″ Plate |
| Pivot Plate | 1/2″ |
| Axle | None –Drive Motors Coupled Direct to Sprockets |
| Supports | Gussets used Throughout |
| Cutter Wheel | |
| Wheel Diameter | 21 Inches with Teeth |
| Wheel Thickness | 1 ¼ Inch |
| Wheel Speed | 1350 RPM Nominal |
| Number of Teeth | 36 Razor Teeth |
| Type of Cutter Teeth | Hard Micro Structure Carbide |
| Wheel Type | Razor |
| Chip Guards | Rubber and Metal |
| Cutting Dimensions | |
| Below Ground | 14 Inches |
| Hydraulic System | 34 Inches |
| Width of Cut | 50 Inch Arc |
Gallery
